The Chinese created a magnet 32x stronger than the Earth's magnetosphere, a spacecraft to go safely to Mars or the Moon would need at least a magnetosphere of tesla strength equal to at least 1x that of the Earth
@vfxsameer1925 Says:
Bgm name please
@FurkanDincerov Says:
Hello
@FurkanDincerov Says:
Hi
@Ship_30w Says:
Where's Starship Preparing for Fifth flight test?? 😢
It’s amazing. There are different height, shape. It’s creation extremely quality. Made with love. ❤️❤️🌹🌹
@TopXRGunstock Says:
velo3D’s metal 3D printing technology services and printers are the core technology of the Raptor engine
@PHASE2catamaran Says:
WOW
@babytoon6150 Says:
damn even in movies u cant find someone like elon musk !!!!
@nightowl9519 Says:
IFT-4 was incredible!
@matthevandenberg Says:
Who else is waiting for the Flight 4 preparation video?
@DžanárdanJaroslav Says:
❤❤❤❤ Hare Krišna 🍀🍂🧡🎉🦚🪷
@jjamesh714 Says:
This is awesome!! GO SPACEX!!!!
@RV4aviator Says:
The future is now..! Simply awesome..! And I'm watching it via my new Starlink service at only 254Mb/s down, Meh..!? its usually much faster at around 290-319Mb/s ..!!!! he he 🤣
@bbqbb4131 Says:
By the way- who did the music?
@porosborobudur Says:
Awesome video 👍👍👍
@kayzo12mc Says:
Onangi yakudzani kanali qaytarib 🤬🤬🤬🤬
@saidvich.07 Says:
YAKUDZA TOP
@LadyStrzygaDiscoversThePast Says:
Amazing. Thanks for sharing 🦇 👍
@drgs-j9q Says:
م
@drgs-j9q Says:
والله انك اخبل والله قالو العلما تتوقف تمشي مستحيل وهو علما عرفين كيف تمشي عيمشي بمه العالن
@pruthvirajgatkul1046 Says:
Wind the ceramic tiles and the hull of starship with Carbon fiber filament (without binding resins)
@paracence Says:
@naresharanjian1786 Says:
no way they used a cybertruck to town an engine
@millyofc-q4d Says:
WHERE IS CAUÃ IN
@JasonBower-ql3cd Says:
Here's a New one!
Thank you, Elon Musk 😊🌱
Lincoln, Nebraska🌱😊
@TecWhiz-yl7se Says:
The engine power owes its salvation solely to the gravity caused by the tons of liquid in the final back flip of the ship in the last seconds, because the speed of Mach 3-4 descent as rapid from 4000 to 0 km/h: blockages of the cones in normal atmosphere (turbo blower at 3500 km/h against winds of 4000), leaving the fuels and gases constantly stuck to the ceiling of the tanks throughout the 100 km atmospheric descent.
The engine turbines end up exploding empty when the booster ( the building 🏢🏢) is restarted with the compartments partially weightless towards the vertical ground (SN 15) or shortage of fuel reserve concentrated only on this phase of the soft landing of new Raptors 4.0🤠😎???
This looks strangely like this sport of CESTA PUNTA ⛳⛳🎾🎾 the fuel here instead of the fastest bullets of the striking sports during the last seconds of filling the RAPTORS engines a feat ( Physics of fluids) magnificently reissued by (SN15) and its flip feed valves final burner towards the ground✨✨🎉🎉🎊🎊✨✨🐲🔥🔥🙌🙌😎😎🚀🪐🪐🌕🌕
@vardhan_tm Says:
Hello spacex good morning SEE YOU SOON 😂
@Icmpiano Says:
Elon Musk If you want to take people to Mars, you need me.
@TecWhiz-yl7se Says:
If there is a fairly accurate mapping of all surface sections of the ship, the tiles could be notched on three hook points inside the tiles, using the aeronautical fixing system of all wiring around the blade lugs current perpendiculars.
But the process requires manual wiring to center the gripping force in a spiral connecting the cable triangle by three twisted ropes or mini-cable connected by 3/1 or 3/3 screwing, held by gripping fins in contact with the connecting ropes on the glued slabs before final tightening.
This process, widely used in aeronautics, takes more time due to its reliability in assembling engine parts against vibration stalls.
Undergoes vibration and wall deformation tests due to very strong temperature variations.
A real challenge in choosing an ultra-light cable due to the overload on the entire tank and super resistant to high temperatures would be a plus.
The simple door leaves of the ship would each time put it in danger against dangerous intrusions, in particular the loss of all cargo due to the blocking of an unhardened and uninsulated mechanism in the face of temperatures above -200 C°?
either the fine rods and ball joints are captured by fine gas particles (sublimation) or quickly solidified in a few seconds upon opening or in spatial exposure.
This folding interior door panel allowing the entry of cold gases during the ascent and increasing the rigidity of the ball joints once in space will almost inevitably seize the mechanism of this ultra-light spoon.
Only S.A.S mechanisms with synchronized interior/exterior shutters are reliable in this hostile environment, although there is no doubt that these types of insulating doors are very well manufactured in sliding or with multiple diaphragms for later versions.
Many solutions are unexplored, so a very good journey whichever way you go.🧗♂🧬🚁🚀🛸🏌♀👍🙌🧙♂😎🐲🌎🌍👽🪐✨🌕
@Siamrocket_Aerospace Says:
SpaceX คือสุดยอดบริษัทอวกาศที่ดีที่สุดในโลก
@vattoxonfire1278 Says:
So cool
@flips300021 Says:
Oh! Those Diamonds trails. Must be seen in Slo Mo. To the sound of Shirley https://www.youtube.com/watch?v=jboEolwHIIA
@machenka Says:
Am I the only one struggling to understand how SpaceX are still struggling to even get to orbit with a lunar mission when the exact same thing was done in the first try back in the 60’s with the Saturn V? It’s not my tax money that’s paying for these insanely expensive failures but there has to be some American taxpayers that feel somewhat robbed here.
That said I’m no space expert so perhaps somebody can explain to me how this is not just an enormous expensive failed project at this point? I get that most just likes whatever that Musk dude is doing but I don’t care about him, so a real explanation about why this program hasn’t been cancelled yet would be great to hear. Can SpaceX just continue burning US tax money forever even though they can’t deliver what we were able to do several decades ago? I’m just 🤯 here. 😂
@vichotimothy1436 Says:
When recap ift 3
@kiandrah8517 Says:
And God said "Let there be man on Mars", and there was. Or was there? Stay tuned for the next enthralling chapter in God's plans for man.
@Wer_u Says:
DİKKAT !!
@Wer_u Says:
ARKADAŞLAR HESAP ÇALIN TI BÜTÜN VİDİOLARDAN ÇIKIN ASLINDA U VURALDİYE BİR HESAP VAR YUOTUBE HESABI ASLINDA BU HESABIN İÇİNDE PUG MOBİLOLCAKTI BEN BU HESABI BANLATIYORM HESAP ÇALINTI !!
@bradmagicspacex Says:
🪄🌍🚀🚀🚀🌠🌌🌠🌌🌠🌌🌠🌌🌌🌠🌕🌖🌗🌘🌑🌒🌓🌔🌕🌄☀️🌥️⛅🌤️
@bradmagicspacex Says:
🚀🚀🚀
@AsT-xg6tf Says:
we want you back here, better than most of the hollywood production, music nailed it...
@bojackson8034 Says:
I just love that man!!! ❤
@ComicClip24x7 Says:
https://youtu.be/NV32qgTnN5A?si=ozm-pWyYeRpfKHH7 elon musk crazy plan 😮😮
@ottomunoz3531 Says:
I have a simple solution for the tiles problem! Simple! MAKE ONE SINGLE TILE!!! DONE!!! ONE FOR THE BODY AND ONE FOR THE TIP! DONE!
LATEST COMMENTS